Fiber Optic Splice Closure Suppliers Share What Is Fiber Fusion Stitching (Automobiles & Vehicles - Bicycles)

AUNetAds > Automobiles & Vehicles > Bicycles

Item ID 1356296 in Category: Automobiles & Vehicles - Bicycles

Fiber Optic Splice Closure Suppliers Share What Is Fiber Fusion Stitching

The two fibers of the spliced ​​cable are connected. Any company that uses fiber will let trained technicians know how to properly splicing these complex cables. Because this can be expensive maintenance, experience and knowledge are a must. So today, Fiber Optic Splice Closure suppliers are sharing the right way to connect fiber optic cable to two professions:

1. Fusion stitching method:

Fusion welding understands an electric arc furnace for welding in which two or more fibers are permanently joined together.

First, by stripping the fiber coating, jacket and tubing, ensure that only bare fibers are displayed. You want to fill any gel that cleans all the fibers. A clean environment must have a good connection.

The fibers are then cut. A good kitchen knife must be successful. When you glue the fibers together, you can manually or automatically align the fibers, depending on the type of machine. Once proper alignment is achieved, the arc is combined with the molten fibers to form a permanent weld of the ends of the two fibers.

Finally, protection is obtained by using a fiber heat-shrinkable tube silica gel. This will keep the fiber away from any external components or may be damaged in the future.

2. Mechanical suture

It is understood that the basic difference between mechanical connection and welding is that no fusion splicer is required. This is also a quick method and it does not exist

First, the protective coating was peeled off on the prepared fibers. Then, the case of cutting the fiber is the same, but the accuracy is not important. They are mechanically engaged and positioned in the mechanical connection unit. In this step, the connector covers are bonded or joined together.

Finally, the fiber heat shrink tubing is protected. As with the fusion splice, this will keep the fiber optic cable or disconnected from the external security components.

information about Fiber Optic Splice Closure :

Related Link: Click here to visit item owner's website (0 hit)

Target State: Northern Territory
Target City : Yuyao
Last Update : 11 September 2019
Number of Views: 56
Item  Owner  : greentelftthgane
Contact Email:
Contact Phone: (None)

Friendly reminder: Click here to read some tips.
AUNetAds > Automobiles & Vehicles > Bicycles
 © 2020
2020-05-31 (0.073 sec)