Handmade sink manufacturers Share How to Choose High Quality Sink
Generally, when testing the quality of stainless steel flume, various problems such as material, thickness, hole depth and flatness will be analyzed. In the following, handmade sink manufacturers will introduce the testing methods from these aspects.
1. Material-Hardness and Gloss
Generally 301,304,430 stainless steel. 304DDQ stainless steel is preferred. Light weight, wear resistance, high temperature resistance, aging resistance and no rust. For example, MOON adopts high quality 304 stainless steel.
2. Thickness-Overall Stiffness
Generally 0.7 ~ 1 mm.
3. Hole Position-Back Position, Center Position and Side Position
The rear position is the best so that there is more space for the lower part of the cabinet. Lateral position takes second place.
4. Edge-thin edge, narrow edge and straight edge
Generally, the side height is less than 4mm and the side width is less than 20mm, which is the best. It can make the table level off, prevent side leakage, and the effective volume of the basin body is large.
5. Depth-Shallow and Deep
Generally > 180mm is the best, the basin body is deep, the washing amount is large, and splash water is prevented.
information about handmade sink manufacturers : https://www.afastainlesskb.com/product/sink/handmade-sink/
|Related Link: Click here to visit item owner's website (0 hit)|
|Target State: New South Wales|
Target City : Yuyao
Last Update : 02 September 2019
Number of Views: 51
|Item Owner : afastainlesskb|
Contact Phone: (None)
|Friendly reminder: Click here to read some tips.|