Free Classifieds at - View Item Content by ID 1316643

AUNetAds > Automobiles & Vehicles > Bicycles > Item ID 1316643

Item ID 1316643 in Category: Automobiles & Vehicles - Bicycles

Cannot view this item. It could be pending, expired or deleted.
Below item is randomly selected from the same category and may have similar content.

Boxing Sandbag Manufacturers Share The Color Of Buoys

Each group of buoys is made into a long field control structure. Generally, a group of buoys is divided into two buoys. The internal shape of each buoy block matches the outer diameter of the riser and auxiliary tube. There are several situations that need to be considered in the design stage of the buoy structure. Boxing Sandbag manufacturers share the following points:

1. The float shell is generally formed by the entire mold, and then the foam material is injected into the packaging method. The surface material is generally fiber-reinforced material, which has strong anti-wear and impact resistance. The hard surface of the buoy made of this material can withstand the water pressure in deep water.

2. In some cases, in order to further increase the strength of the buoy block, a layer of reinforcing mesh is added between the buoy shell and the synthetic foam section.

3. In order to avoid excessive transfer of the bending load caused by the gravity of the horizontal plane to the buoy during the installation or lifting of the vertical pipe, two flexible cushions were consciously designed on the inner circumference of the buoy block.

4. The upper and lower ends of most buoys are designed with a complete set of cylinders, one end of each sleeve is designed as a concave end, and the other end is designed as a convex end, so that each group of buoys forms a buoy string separately after installing the sleeve Facilitates uniform buoys when performing certain operations.

5. After the buoy block is processed, in order to facilitate the reactor ratio, the outer circumference of the buoy block is usually designed as a plane.

6. The most important function of the buoy is to provide buoyancy for the riser in the water. Each buoy block should be installed and fixed in a specific lifting pipe section, and its internal groove shape must correspond to the actual structure of the riser.

7. In order to distinguish buoys from different water depths, buoys have different colors.

The above content is shared and organized by Punching Bag Kickboxing manufacturer, hoping to help those in need

Related Link: Click here to visit item owner's website (0 hit)

Target State: Northern Territory
Target City : All Cities
Last Update : 26 May 2020
Number of Views: 11
Item  Owner  : taizhouglejin
Contact Email: (None)
Contact Phone: (None)

Friendly reminder: Click here to read some tips.
AUNetAds > Automobiles & Vehicles > Bicycles > Item ID 1316643
 © 2020
2020-06-04 (0.097 sec)