Free Classifieds at AUNetAds.com - View Item Content by ID 1305928

AUNetAds > Automobiles & Vehicles > Auto Parts & Services > Item ID 1305928

Item ID 1305928 in Category: Automobiles & Vehicles - Auto Parts & Services

Cannot view this item. It could be pending, expired or deleted.
Below item is randomly selected from the same category and may have similar content.

How To Install Industrial Chain


The riding power comes from the transmission system. The main component is Industrial Chain , so the chain must be installed correctly before starting a long distance ride home.

According to the different tooth plates, bicycle chains can be divided into three types: single tooth plates, double tooth plates and triple tooth plates (single speed vehicles are not in the range), so the method of judging the length of the chain is different. First, let us determine the length of the chain. Integral chain installation: commonly used in station trucks and folding wheel teeth. The chain does not pass through the rear dial, passes through the largest tooth plate and the largest flywheel to form a complete circle, leaving 4 chains.

Double-disc chain installation: ordinary road car gear discs, folding cars also use road gear discs, the chain passes through the rear dial, the largest gear disc and the smallest flywheel to form a complete circle, the straight line formed by the tensioner and the guide wheel and the ground Intersecting, the chain length with angle less than or equal to 90 degrees is the optimal chain length.
Three-tooth plate chain installation: ordinary mountain bike tooth plate and road tooth plate also have three-tooth plate design.

The chain does not pass through the rear dial, passes through the largest chainring and the largest flywheel to form a complete circle, leaving two chains. After the length is determined, the chain should be installed. It is worth noting that some chains are positive and negative, such as Shimano570067007900, mountain HG94 (new 10s chain) chains, which are usually installed correctly literally outward.
The reason why there is a head and a tail is because the chain chamfering is different from the chain chamfering. Serious warning not to stagger back or forth, otherwise, the chain will break in a short time.

A small detail in the final preparation of the chain installation is often overlooked. It is the direction when the inner and outer guides are installed, and it should be left or right. The correct installation direction will make your chain stronger. During hard pedaling, A is less likely to break than B.



The above content is compiled and shared by the Leaf Chain manufacturer, hoping to help those in need.

Related Link: Click here to visit item owner's website (0 hit)

Target State: South Australia
Target City : All Cities
Last Update : 04 August 2020 3:46 PM
Number of Views: 3
Item  Owner  : hangzhouhzqj
Contact Email: (None)
Contact Phone: (None)

Friendly reminder: Click here to read some tips.
AUNetAds > Automobiles & Vehicles > Auto Parts & Services > Item ID 1305928
 © 2020 AUNetAds.com
2020-08-04 (0.112 sec)