Vibratory Finishing Machine Manufacturer Share Maintenance Items
Free Online Advertising
Free Internet Web Site Advertising.
UK Free Classifieds
United Kingdom Free Ads Website.
100% Free Ad Posting.
Canada Free Ads
Popular Online Classifieds in Canada.
No Sign up, No Email Required to Post.
Today, the Vibratory Finishing Machine manufacturer shares the knowledge of vibration motors:
First, the maintenance items that should be paid attention to during operation:
Vibration motors are generally installed in places with harsh working environment and large dust. The motor itself has no fan cooling. It relies on natural cooling. In addition to the maintenance of ordinary motors, it should also pay attention to the following aspects:
(1), inspection content:
1, often check the motor surface hygiene
2. Clean up in time when dust is affected by heat
3. Always check if the motor foot fixing bolt is loose.
4. Fasten to the required torque with a torque wrench when loosening
5, check whether the vibration is abnormal
(B), processing methods:
1. Stop when the vibration is abnormal, and disassemble the eccentric block shield to check and handle
2. Is the eccentric block guard tight?
3. Shutdown when the seal is not strict
4. Is the motor outlet cable worn?
5, if worn, stop processing
6, whether the bearing is short of oil
7. Fill the oil with a grease gun every 2 months during the operation, and repair it once a year.
8, the motor current is normal
9, abnormal shutdown check processing
Second, maintenance matters:
1. The outgoing cable of the vibration motor is subjected to vibration. Therefore, it is necessary to use a cable with a large elasticity as the motor lead. Generally, the motor lead is easily broken or worn at the root of the motor outlet. When such a fault occurs, the motor must be turned on, from the inside of the motor. Rewire.
2. The bearings of the vibration motor should use heavy-duty bearings, which can carry a certain axial load. Regardless of the installation direction, the bearing life is not affected by the axial load.
3. When disassembling the bearing, record the position of the eccentric block and the percentage of the exciting force. After replacing the bearing, check the shaft of the motor to have a certain axial movement. Do not install the eccentric block air test motor first. Reset the eccentric block according to the original record.
4. The protective cover of the eccentric block should be sealed to prevent dust from entering the interior and affecting the operation of the motor.
information about vibratory finishing machine : https://www.zhongyun-machine.com
|Related Link: Click here to visit item owner's website (0 hit)|
|Target State: Queensland|
Target City : Huzhou
Last Update : 13 April 2019
Number of Views: 33
|Item Owner : machineunique|
Contact Phone: (None)
|Friendly reminder: Click here to read some tips.|