Free Classifieds at - View Item Content by ID 1190387

AUNetAds > Business Opportunities > Home Business > Item ID 1190387

Item ID 1190387 in Category: Business Opportunities - Home Business

Cannot view this item. It could be pending, expired or deleted.
Below item is randomly selected from the same category and may have similar content.

Fiber Optic Splice Closure Manufacturers Share The Capabilities Of Fiber Optic Lighting

In life, have you seen fiber optic lighting, and if not, today's Fiber Optic Splice Closure manufacturers talk about what fiber optic lighting and its features are:

Fiber optic lighting systems include light sources, mirrors, color filters, and fiber optics.

When the light source passes through the mirror, a beam of approximately parallel light is formed. The light beam becomes colored light due to the action of the color filter. When the beam enters the fiber, the colored light is sent to a predetermined location along the fiber path.

The light source is usually very strong due to the loss of light on the way. The commonly used light source is about 150~250W. Furthermore, in order to obtain an approximately parallel beam, the illumination point should be as small as possible, similar to a point source.

Mirrors are an important factor in the ability to obtain approximately parallel beams. Therefore, an aspherical mirror is usually used.

The color filter is the part that changes the color of the beam. The corresponding color light source is obtained by changing the filters of different colors as needed.

Fiber is the main body of fiber optic lighting systems. The function of the fiber is to transmit or transmit light to a predetermined location. There are two types of fibers: end-emitting and bulk-emitting. The former is illuminated by the taillights after the beam has been transmitted to the end point, while the latter itself is the illuminator, forming a flexible beam.

For fiber materials, it must be in the visible range, and the loss of light energy should be minimized to ensure the quality of the illumination. However, it is practically impossible to have no loss, so the fiber transmission distance is preferably about 30 μm.

There are three types of fiber: single, multiple, and mesh. For a single fiber, the diameter is Ф6~Ф20mm. It can be divided into body lights and tail lights. For multiple strands, they are all end-emitting. The diameter of the multi-strand fibers is usually from Ф0.5 to Ф3 mm, and the number of strands is usually from several hundreds to several hundreds.

The reticular fibers are composed of thin-diameter bulk-emitting fibers which can constitute a flexible optical strip.

information about Fiber Optic Splice Closure :

Related Link: Click here to visit item owner's website (0 hit)

Target State: South Australia
Target City : Yuyao
Last Update : 18 September 2019
Number of Views: 5
Item  Owner  : greentelftthgane
Contact Email:
Contact Phone: (None)

Friendly reminder: Click here to read some tips.
AUNetAds > Business Opportunities > Home Business > Item ID 1190387
 © 2019
2019-09-19 (0.127 sec)